.png){kind=logo}
HEAT PUMP INVERTER - 17kW/ 5.2m3/h + WiFi
Code: 3EXX0723Product detailed description
The heat pump enables the heat to be extracted from the air around the pool by means of a cycle of compression and expansion of the heat transfer fluid. The air is propelled by a fan through an evaporator where it transfers its heat to the heat transfer fluid (cooling the air in the process). The heat transfer fluid is then transported by a compressor, which compresses and heats it, to the heat exchanger coils where it transfers its heat to the pool water. From the heat exchanger, the cooled fluid flows to the expansion valve where it is depressurised and rapidly cooled. This cooled fluid flows back into the evaporator where it is heated by the flowing air. The whole process is continuous and monitored by pressure and temperature sensors.Additional parameters
| Category: | Heat pumps Inverter |
|---|---|
| Heating capacity: | 17 kW |
| COP: | A26/W26/ humid. 80% 7,20-16,10 |
| Power input: | 2,8 kW |
| Power supply: | 230 V / 50 Hz |
| Refrigerant: | R32, 1100 g |
| Water flow volume: | 8 m³/h |
| Advised Pool volume with pool cover: | up to 70 m³ |
| Pipe connection: | 50 mm |
| Noise level 1 m: | 42-52 dB (A) |
| Weight (net / gross): | 66 / 76 kg |
| Carton size: | 108 x 46 x 75 cm |
| Quantity on palette: | 4 pcs |
| WiFi module: | Yes |
Add a comment
HR
Winter cover
Hintringer Roland
Winter cover
Hintringer Roland
Hello, is there a suitable winter cover for this heat pump?
Reply
Reply
R
Winter cover
Renata
Winter cover
Renata
Dear Roland, unfortunately we don't have compatible cover for this model.
Thank you for your understanding.
Have a nice day, Renata